Question 1

Frequently Asked Questions

Accepted Answer

Frequently Asked Questions

Question 2

Which drones are compatible with this 803063 JST battery?
                    +
                

                
                    This 803063 2S Li-Po battery is specifically designed for the YiZhan X6 RC drone quadcopter. It features a JST connector and measures 68×30×14mm. If your YiZhan X6 battery drains quickly or won't hold a charge, this is the correct replacement. Please verify your drone uses a JST connector before ordering. This is a 2S 7.4V battery — NOT for 1S (3.7V) or 3S (11.1V) drones. For reference, similar 2S 1200mAh batteries on AliExpress sell for $8-14, and Amazon for $12-18.
                
            
                                
            
                
                    What is the capacity and discharge rate of this battery?
                    +
                

                
                    The 803063 battery has a capacity of 1200mAh and a rated voltage of 7.4V. Full charge voltage is 8.4V (4.2V per cell). The 25C discharge rate provides up to 30A burst current (1200mAh × 25C = 30A), delivering ample power for aggressive flight, flips, and responsive controls. The battery dimensions are 68×30×14mm, weight 56g. Always use a 2S Li-Po charger and never discharge below 6.0V (3.0V per cell).
                
            
                                
            
                
                    How should I charge and maintain this 2S Li-Po battery?
                    +
                

                
                    Use only a balance charger designed for 2S (7.4V) Li-Po batteries. Key guidelines:
- Set charger to Li-Po mode with 2S selected — full charge voltage is 8.4V
- Recommended charge current: 1.2A (1C maximum)
- Balance charging is recommended for cell health
- Never leave the battery unattended while charging
- Do not discharge below 6.0V (3.0V per cell)
- For storage (over 7 days), charge/discharge to 3.8V per cell (7.6V total)
- Store at room temperature away from direct sunlight
If the battery swells or becomes hot during charging or use, stop immediately and recycle properly.

Accepted Answer

Which drones are compatible with this 803063 JST battery?
                    +
                

                
                    This 803063 2S Li-Po battery is specifically designed for the YiZhan X6 RC drone quadcopter. It features a JST connector and measures 68×30×14mm. If your YiZhan X6 battery drains quickly or won't hold a charge, this is the correct replacement. Please verify your drone uses a JST connector before ordering. This is a 2S 7.4V battery — NOT for 1S (3.7V) or 3S (11.1V) drones. For reference, similar 2S 1200mAh batteries on AliExpress sell for $8-14, and Amazon for $12-18.
                
            
                                
            
                
                    What is the capacity and discharge rate of this battery?
                    +
                

                
                    The 803063 battery has a capacity of 1200mAh and a rated voltage of 7.4V. Full charge voltage is 8.4V (4.2V per cell). The 25C discharge rate provides up to 30A burst current (1200mAh × 25C = 30A), delivering ample power for aggressive flight, flips, and responsive controls. The battery dimensions are 68×30×14mm, weight 56g. Always use a 2S Li-Po charger and never discharge below 6.0V (3.0V per cell).
                
            
                                
            
                
                    How should I charge and maintain this 2S Li-Po battery?
                    +
                

                
                    Use only a balance charger designed for 2S (7.4V) Li-Po batteries. Key guidelines:
- Set charger to Li-Po mode with 2S selected — full charge voltage is 8.4V
- Recommended charge current: 1.2A (1C maximum)
- Balance charging is recommended for cell health
- Never leave the battery unattended while charging
- Do not discharge below 6.0V (3.0V per cell)
- For storage (over 7 days), charge/discharge to 3.8V per cell (7.6V total)
- Store at room temperature away from direct sunlight
If the battery swells or becomes hot during charging or use, stop immediately and recycle properly.

Question 3

Which drones are compatible with this 803063 JST battery?
                    +
                

                
                    This 803063 2S Li-Po battery is specifically designed for the YiZhan X6 RC drone quadcopter. It features a JST connector and measures 68×30×14mm. If your YiZhan X6 battery drains quickly or won't hold a charge, this is the correct replacement. Please verify your drone uses a JST connector before ordering. This is a 2S 7.4V battery — NOT for 1S (3.7V) or 3S (11.1V) drones. For reference, similar 2S 1200mAh batteries on AliExpress sell for $8-14, and Amazon for $12-18.

Accepted Answer

Which drones are compatible with this 803063 JST battery?
                    +
                

                
                    This 803063 2S Li-Po battery is specifically designed for the YiZhan X6 RC drone quadcopter. It features a JST connector and measures 68×30×14mm. If your YiZhan X6 battery drains quickly or won't hold a charge, this is the correct replacement. Please verify your drone uses a JST connector before ordering. This is a 2S 7.4V battery — NOT for 1S (3.7V) or 3S (11.1V) drones. For reference, similar 2S 1200mAh batteries on AliExpress sell for $8-14, and Amazon for $12-18.

Question 4

Which drones are compatible with this 803063 JST battery?
                    +

Accepted Answer

Which drones are compatible with this 803063 JST battery?
                    +

Question 5

+

Accepted Answer

+

Question 6

This 803063 2S Li-Po battery is specifically designed for the YiZhan X6 RC drone quadcopter. It features a JST connector and measures 68×30×14mm. If your YiZhan X6 battery drains quickly or won't hold a charge, this is the correct replacement. Please verify your drone uses a JST connector before ordering. This is a 2S 7.4V battery — NOT for 1S (3.7V) or 3S (11.1V) drones. For reference, similar 2S 1200mAh batteries on AliExpress sell for $8-14, and Amazon for $12-18.

Accepted Answer

This 803063 2S Li-Po battery is specifically designed for the YiZhan X6 RC drone quadcopter. It features a JST connector and measures 68×30×14mm. If your YiZhan X6 battery drains quickly or won't hold a charge, this is the correct replacement. Please verify your drone uses a JST connector before ordering. This is a 2S 7.4V battery — NOT for 1S (3.7V) or 3S (11.1V) drones. For reference, similar 2S 1200mAh batteries on AliExpress sell for $8-14, and Amazon for $12-18.

Question 7

What is the capacity and discharge rate of this battery?
                    +
                

                
                    The 803063 battery has a capacity of 1200mAh and a rated voltage of 7.4V. Full charge voltage is 8.4V (4.2V per cell). The 25C discharge rate provides up to 30A burst current (1200mAh × 25C = 30A), delivering ample power for aggressive flight, flips, and responsive controls. The battery dimensions are 68×30×14mm, weight 56g. Always use a 2S Li-Po charger and never discharge below 6.0V (3.0V per cell).

Accepted Answer

What is the capacity and discharge rate of this battery?
                    +
                

                
                    The 803063 battery has a capacity of 1200mAh and a rated voltage of 7.4V. Full charge voltage is 8.4V (4.2V per cell). The 25C discharge rate provides up to 30A burst current (1200mAh × 25C = 30A), delivering ample power for aggressive flight, flips, and responsive controls. The battery dimensions are 68×30×14mm, weight 56g. Always use a 2S Li-Po charger and never discharge below 6.0V (3.0V per cell).

Question 8

What is the capacity and discharge rate of this battery?
                    +

Accepted Answer

What is the capacity and discharge rate of this battery?
                    +

Question 9

+

Accepted Answer

+

Question 10

The 803063 battery has a capacity of 1200mAh and a rated voltage of 7.4V. Full charge voltage is 8.4V (4.2V per cell). The 25C discharge rate provides up to 30A burst current (1200mAh × 25C = 30A), delivering ample power for aggressive flight, flips, and responsive controls. The battery dimensions are 68×30×14mm, weight 56g. Always use a 2S Li-Po charger and never discharge below 6.0V (3.0V per cell).

Accepted Answer

The 803063 battery has a capacity of 1200mAh and a rated voltage of 7.4V. Full charge voltage is 8.4V (4.2V per cell). The 25C discharge rate provides up to 30A burst current (1200mAh × 25C = 30A), delivering ample power for aggressive flight, flips, and responsive controls. The battery dimensions are 68×30×14mm, weight 56g. Always use a 2S Li-Po charger and never discharge below 6.0V (3.0V per cell).

Question 11

How should I charge and maintain this 2S Li-Po battery?
                    +
                

                
                    Use only a balance charger designed for 2S (7.4V) Li-Po batteries. Key guidelines:
- Set charger to Li-Po mode with 2S selected — full charge voltage is 8.4V
- Recommended charge current: 1.2A (1C maximum)
- Balance charging is recommended for cell health
- Never leave the battery unattended while charging
- Do not discharge below 6.0V (3.0V per cell)
- For storage (over 7 days), charge/discharge to 3.8V per cell (7.6V total)
- Store at room temperature away from direct sunlight
If the battery swells or becomes hot during charging or use, stop immediately and recycle properly.

Accepted Answer

How should I charge and maintain this 2S Li-Po battery?
                    +
                

                
                    Use only a balance charger designed for 2S (7.4V) Li-Po batteries. Key guidelines:
- Set charger to Li-Po mode with 2S selected — full charge voltage is 8.4V
- Recommended charge current: 1.2A (1C maximum)
- Balance charging is recommended for cell health
- Never leave the battery unattended while charging
- Do not discharge below 6.0V (3.0V per cell)
- For storage (over 7 days), charge/discharge to 3.8V per cell (7.6V total)
- Store at room temperature away from direct sunlight
If the battery swells or becomes hot during charging or use, stop immediately and recycle properly.

Question 12

How should I charge and maintain this 2S Li-Po battery?
                    +

Accepted Answer

How should I charge and maintain this 2S Li-Po battery?
                    +

Question 13

+

Accepted Answer

+

Question 14

Use only a balance charger designed for 2S (7.4V) Li-Po batteries. Key guidelines:
- Set charger to Li-Po mode with 2S selected — full charge voltage is 8.4V
- Recommended charge current: 1.2A (1C maximum)
- Balance charging is recommended for cell health
- Never leave the battery unattended while charging
- Do not discharge below 6.0V (3.0V per cell)
- For storage (over 7 days), charge/discharge to 3.8V per cell (7.6V total)
- Store at room temperature away from direct sunlight
If the battery swells or becomes hot during charging or use, stop immediately and recycle properly.

Accepted Answer

Use only a balance charger designed for 2S (7.4V) Li-Po batteries. Key guidelines:
- Set charger to Li-Po mode with 2S selected — full charge voltage is 8.4V
- Recommended charge current: 1.2A (1C maximum)
- Balance charging is recommended for cell health
- Never leave the battery unattended while charging
- Do not discharge below 6.0V (3.0V per cell)
- For storage (over 7 days), charge/discharge to 3.8V per cell (7.6V total)
- Store at room temperature away from direct sunlight
If the battery swells or becomes hot during charging or use, stop immediately and recycle properly.

803063 1200mAh 7.4V 2S 25C Li-Po Battery with JST Plug for YiZhan X6 RC Drone Quadcopter

Description

Discover more from Battery.qingsm.tech

Reviews

Frequently Asked Questions

803063 1200mAh 7.4V 2S 25C Li-Po Battery with JST Plug for YiZhan X6 RC Drone Quadcopter

Description

Discover more from Battery.qingsm.tech

Reviews

Frequently Asked Questions

Related products

3PCS 602035 350mAh 25C 3.7V Battery with XH2.54 Plug for RC Drone & Helicopter

14500 500mAh 6.4V JST-2P / SM-3P Replacement Battery for WLtoys 18401 18402 RC Off-Road Vehicles

14500 600mAh 7.4V 2S Li-ion Battery with SM-3P Plug for Shengxiong Weiteng 981A RC Car

523450 600mAh 7.4V SM-4P Li-Po Battery for Double Eagle E561 Excavator RC Drone – 60x34x13mm