Description
✅ Condition: New – Factory-tested quality & Warranty
✅ 1350mAh High Capacity – Restores full battery life for DSC-RX100, HX50, WX300 and more
✅ CE / RoHS / UN38.3 Certified
✅ 90-Day Warranty from delivery – Longer coverage than major platforms
✅ Ships in 3-7 days with tracking
🛡️ Shipping Protection Available at Checkout
✅ PayPal Buyer Protection included
⚠️ Low Stock Alert: Only 8 left in stock. Order now to avoid waiting.
Battery model: NP-BX1
Capacity: 1350mAh / 5.00Wh
Rated voltage: 3.7V
Charge limit voltage: 4.2V
Battery type: Li-ion
Compatible with: DSC-WX300 / DSC-HX300 / DSC-HX50 / DSC-RX100 II / DSC-HX60 / DSC-RX100 / DSC-RX100 III / DSC-RX100 IV / DSC-RX100 V / DSC-RX100 VI / DSC-RX100 VII / DSC-RX1 / DSC-RX1R / DSC-HX90 / DSC-HX90V / DSC-HX99 / DSC-WX350 / DSC-WX500 / ZV-1 / ZV-1 II / FDR-X3000 / HDR-AS50
Package include: 1 x battery
Restore the reliable battery performance of your digital camera or action camera with this NP-BX1 1350mAh replacement battery. The NP-BX1 is a widely used battery standard across many compact cameras, vlogging cameras, and action cams, powering everything from daily photography to 4K video recording. After regular charging cycles, the original battery may show signs of aging, such as shorter shooting time, sudden shutdowns during recording, slower flash recycle, or a swollen battery compartment. This NP-BX1 Li-ion battery is a direct replacement designed to bring back full shooting power for your device.
Designed for Reliable Daily Use: The NP-BX1 battery uses high-density cell technology with multi-layer safety protection against overcharge, over-discharge, and short circuits. It is factory-tested and carries CE, RoHS, and UN38.3 certification. With 1350mAh capacity and 3.7V rated voltage, it provides 5.00Wh of energy and supports stable performance for extended photo sessions, video recording, and daily camera use.
Compatibility Note: Fits devices that use the NP-BX1 battery, including the DSC-RX100 series, DSC-HX50, DSC-HX60, DSC-WX300, DSC-HX300, ZV-1 series, FDR-X3000, and many more models listed above. Please confirm your original battery label before ordering — NP-BX1 should be printed on your current battery. Verify that your battery matches the model number, capacity (1350mAh), and voltage (3.7V). This is a standard camera battery — careful installation is recommended. Using an incorrect battery model may cause improper fit or charging issues.
Battery Care Tips: Use a compatible charger, avoid extreme heat or cold, and try not to drain the battery to 0% often. For daily use, keep the battery level between 20% and 80% when possible. If you store the battery for a long time, keep it at around 50% charge in a cool, dry place. After replacing the battery, check that the battery compartment cover is closed correctly. Stop using immediately if the battery shows any swelling.



Reviews
There are no reviews yet.