Description
✅ Condition: Brand New – Never used, factory‑tested quality
✅ CE / RoHS / UN38.3 Certified
✅ Built‑in Overcharge / Over‑discharge / Short Circuit Protection
✅ 90‑Day Warranty from delivery – Longer coverage than major platforms
✅ Ships in 3‑7 days with tracking
🛡️ Shipping Protection Available at Checkout
✅ PayPal Buyer Protection included
⚠️ Low Stock Alert: Only 1 left in stock. Order now to avoid waiting.
Battery model: 452540 (2S1P)
Capacity: 350mAh / 2.59Wh
Rated voltage: 7.4V (2 cells in series — 3.7V × 2)
Configuration: 2 cells in series (2S1P)
Discharge rate: 30C continuous / 60C burst
Connector: SM-2P / JST (2-pin, red wires)
Battery type: Li-Po (High‑rate, 30C-60C)
Dimensions (single): 45 x 25 x 10mm
Cycle life: 300-500 cycles maintains ≥70-80% capacity with proper handling
Operating temperature: Charge 0-45°C, Discharge -20-60°C
Certifications: CE / RoHS / UN38.3
Compatible with: Dandinghe RC Drone Remote Control Aircraft Model, 60mm-130mm brushless FPV drones, Emax Tinyhawk II, GEPRC TinyGo, iFlight CineBee, TurboBee, Cine Whoop, Happymodel Crux3, BetaFPV Beta75X Beta75 Pro, WLtoys K969 K989 RC drift cars (SM-2P plug compatible), and other 7.4V micro RC aircraft requiring 350mAh 2S Li-Po battery
Package include: 1 x battery
Upgrade your RC flight experience with this 452540 350mAh 2S Li-Po battery. Designed for Dandinghe RC drones and a wide range of 60mm-130mm FPV drones, quadcopters, and micro RC aircraft, this compact 2S 7.4V battery delivers 30C continuous / 60C burst discharge for agile flight, responsive throttle, and crisp aerobatic maneuvers. The standard SM-2P plug provides secure plug‑and‑play connection — no soldering required.
Built with Grade A Li-Po cells and equipped with built‑in PCM protection against overcharge, over‑discharge, and short circuit. CE, RoHS, and UN38.3 certified for safe transport and use. The compact 45×25×10mm size and 19g weight fit perfectly in micro drone battery compartments. For reference, third‑party retailers sell this battery for approximately $8 to $15.
⚠️ Important Li-Po Safety Warning: Only use a dedicated Li-Po balance charger set to 2S (7.4V) mode with charge current ≤0.5C (≤175mA) for safety — never exceed 1C (350mA). Never leave charging unattended. The battery has no water resistance rating — avoid flying in rain or over water to prevent short circuits. Land your drone immediately when voltage drops below 3.2V per cell (6.4V total) to prevent over‑discharge damage.
Compatibility Note: Please power down your device and check your original battery label before ordering. This battery is compatible with Dandinghe drone remote control aircraft models, Emax Tinyhawk II, GEPRC TinyGo, iFlight CineBee, Happymodel Crux3, BetaFPV Beta75X, and WLtoys K969/K989 RC cars with SM-2P plug. Always verify connector type (SM-2P / JST) before ordering. The drone has no official IP water resistance rating, so water seal maintenance is not a concern after replacement.
Battery Care Tips: Avoid full discharge — recharge when voltage drops below 3.2V per cell (6.4V total). Do not expose to high temperatures or direct sunlight. New batteries require 3-5 full charge cycles to reach optimal capacity. For long‑term storage (more than 2 weeks), keep at 40%-60% charge (3.8-3.85V per cell) in a cool, dry place and recharge to storage level every 3 months. Always use a fireproof Li‑Po charging bag. If swelling or overheating is observed, stop use immediately and dispose of properly at a designated battery recycling center.
Discover more from Battery.qingsm.tech
Subscribe to get the latest posts sent to your email.




Reviews
There are no reviews yet.