Description
✅ Condition: Brand New – Never used, factory-tested quality
✅ 2S 7.4V 25C High Discharge – For high-speed RC boats
✅ Hard Case Design – Impact and water resistant
✅ 8 Plug Types Available – Find your exact match
✅ CE / RoHS Certified
✅ 90-Day Warranty
✅ Ships in 3-7 days with tracking
🛡️ Shipping Protection Available at Checkout
✅ PayPal Buyer Protection included
⚠️ Low Stock Alert: Only 8 left in stock. Order now to avoid waiting.
Battery model: 903480 (2S Hard Case)
Capacity: 2800mAh
Voltage: 7.4V (2S Li-Po, 2 cells in series)
Charge limit voltage: 8.4V (4.2V per cell)
Discharge rate: 25C (High discharge for RC boats)
Battery type: Li-Polymer (Hard case)
Dimensions: 86 × 36 × 20mm
Weight: 110g
Compatible with: FT009, UDI902 RC boats and similar RC vehicles
Available plug types (8 variants): JST Plug, SM Plug, EL-2P Plug, KET-2P Plug, T Plug, SM-4P Plug, Xiaotiangong Plug, XT30 Plug
Package include: 1 x battery pack (plug type as selected)
Power up your RC boat with this 903480 2800mAh 7.4V 25C 2S Li-Po battery. Designed for FT009, UDI902 and similar RC boats, the 25C discharge rate provides the burst power needed for high-speed runs and sharp turns. The hard case design protects the cells from water and impacts. The compact 86×36×20mm size fits most RC boat battery compartments. Built with grade A cells and multi-layer safety protection against overcharge, over-discharge, and short circuits. CE and RoHS certified.
⚠️ Important — Choose the correct plug type for your device: This battery is available in 8 different connector versions. Please check your original battery’s plug type before ordering. The plug types are NOT interchangeable. This is a 2S 7.4V pack — NOT compatible with 1S (3.7V) or 3S (11.1V) systems.
Available plug options:
- JST Plug — Standard 2-pin connector for many RC devices
- SM Plug — Small 2-pin connector common on micro RC
- EL-2P Plug — 2-pin locking connector
- KET-2P Plug — KET 2-pin connector
- T Plug — Large Tamiya connector, standard for many RC cars and boats
- SM-4P Plug — 4-pin SM connector
- Xiaotiangong Plug — Small Tamiya connector
- XT30 Plug — 30A rated connector for high-current applications
Charging Instructions: Use only a charger designed for 2S (7.4V) Li-Po batteries. Set charger to Li-Po mode with 2S selected — full charge voltage is 8.4V. Recommended charge current: 2.8A (1C). Never leave the battery unattended while charging. Do not discharge below 6.0V (3.0V per cell). Store at 40-60% charge at room temperature.
Battery Care Tips: Allow the battery to cool before recharging after use. Avoid exposing the battery to water — the hard case provides protection but is not waterproof. If the battery swells, becomes hot, or shows any damage, stop use immediately and recycle properly.
Discover more from Battery.qingsm.tech
Subscribe to get the latest posts sent to your email.


Reviews
There are no reviews yet.