Sale!
973760 2970mAh 3.7V Li-Polymer 6-pin replacement battery for DJI Spark, Mavic Pro, and Mavic Air remote controllers, front view showing battery label
973760 2970mAh 3.7V Li-Polymer 6-pin replacement battery for DJI Spark, Mavic Pro, and Mavic Air remote controllers, additional front view showing battery label and 6-pin connector orientation
973760 2970mAh 3.7V 6-pin replacement battery for DJI remote controller, back view showing model number 973760, capacity 2970mAh, and voltage 3.7V on spec label

973760 2970mAh 3.7V Li-Polymer 6-Pin Replacement Battery for DJI Spark Mavic Pro Mavic Air Remote Controller

Original price was: $24.99.Current price is: $19.99.

🔘 973760 2970mAh 3.7V | 🔋 Li-Polymer (6‑Pin) | 📱 Compatible with DJI Spark / Mavic Pro / Mavic Air Remote Controller

6 in stock

No PayPal account? 💳 Pay with credit/debit card | 🛡️ PayPal Buyer Protected
SKU: 973760 Category: Tags: , ,
📦 Shipping, Warranty & After-Sales Information (Click to expand ▼)

✅ Why Our Warranty Stands Out

Unlike marketplace sellers with short buyer protection windows, we handle claims directly — no automated disputes, no endless back-and-forth.

Compare✅ Qingsm Tech⚠️ eBay / AliExpress
Warranty Period90 days from delivery15-30 days from order confirmation
When It Starts📦 Upon delivery⚠️ Upon order confirmation (even before you receive it)
Claims HandlingWe do it directly — email usAutomated dispute system, seller dependent
After Window ExpiresStill can contact us for supportNo recourse, seller can ignore you

🔋 90-day warranty is the industry standard for replacement batteries. Batteries naturally lose capacity over time — this normal wear is not covered. Warranty applies to manufacturing defects only.

📦 Shipping Cost & Delivery Time (Economy Shipping from China)

📦 Note: Batteries are classified as hazardous goods and must be shipped via specialized channels, which may take slightly longer than standard couriers. Delivery times are estimates and may be affected by customs, weather, or other unforeseen circumstances. If your country is not listed in the table below, we are currently unable to ship batteries to that destination.

DestinationFreight (USD)Est. Delivery Time
United States$7.808–15 days
Canada$6.8018–30 days
Mexico$10.0030–60 days
Germany, France, United Kingdom, Greece$6.5018–30 days
Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Hungary, Ireland, Italy, Luxembourg, Netherlands, Norway, Poland, Portugal, Slovakia, Spain, Sweden, Switzerland$8.0018–30 days
Croatia, Finland, Lithuania, Latvia, Slovenia$8.0030–50 days
Bulgaria, Romania$14.0030–50 days
South Korea, Japan, Australia, New Zealand, Israel, Malaysia, Singapore, Thailand, Philippines, Kazakhstan$7.5018–30 days
United Arab Emirates, Saudi Arabia, Vietnam, Chile, Peru, Colombia, Brazil$18.0025–60 days

🇧🇷 Note for Brazil: Brazilian customs can occasionally cause delays of up to 80 days or more. And please indicate the recipient's CPF, as it is required for Brazilian customs and shipping. Thanks! We appreciate your understanding.

🇪🇺 Note for EU countries: Due to new EU customs regulations effective July 1, 2026, a flat tariff fee of $4.00 (approx. €3.50) applies to shipments to EU countries. This fee covers customs tariff, handling, and payment processing costs, and will be added at checkout. Thank you for your understanding.

🔋 Can't find your battery model? Use our FREE Battery Lookup Service – tell us your device and we'll find a match within 24 hours. 👉 battery.qingsm.tech/find-my-battery

Description

✅ Condition: Brand New – Never used, factory‑tested quality

✅ 2970mAh High Capacity – Factory‑rated 10.989Wh energy

✅ CE / RoHS / ISO9001 / UN38.3 Certified – Meets international safety standards

✅ Built‑in Overcharge / Over‑discharge / Short Circuit / Overcurrent Protection

✅ 6‑Pin Connector – Direct replacement for OEM 973760 / 1ICP10/37/61

✅ 90‑Day Warranty from delivery – Longer coverage than major platforms

✅ Ships in 3‑7 days with tracking

🛡️ Shipping Protection Available at Checkout

✅ PayPal Buyer Protection included

⚠️ Low Stock Alert: Only 6 left in stock. Order now to avoid waiting.

Battery model: 973760 / 1ICP10/37/61 (6-pin connector)
Capacity: 2970mAh / 10.989Wh
Rated voltage: 3.7V
Charge limit voltage: 4.2V
Battery type: Li-Polymer
Dimensions: 62.40 x 36.00 x 9.20mm
Cycle life: 500+ cycles retains ≥80% capacity
Compatible with: DJI Spark Remote Controller (GL300F), DJI Mavic Pro Remote Controller (GL300A, GL300C), DJI Mavic Air Remote Controller (GL200A, GL200C, GL200E), and other DJI remote controllers using 973760 / 1ICP10/37/61 battery
Package include: 1 x battery
Extend your flight control sessions with this 973760 2970mAh 6‑pin Li‑Polymer replacement battery. Designed for DJI Spark, Mavic Pro, and Mavic Air remote controllers, this battery delivers reliable 3.7V output with 2970mAh capacity — keeping your remote powered for multiple flight sessions without mid‑air interruptions.
Built with Grade A Li-Polymer cells and multi-layer safety protection against overcharge, over-discharge, short circuit, and overcurrent. CE, RoHS, ISO9001, and UN38.3 certified for safe transport and use. The battery supports 15W (5V/3A) fast charging via USB‑C — a full charge takes approximately 1.5 hours. With a cycle life of 500+ full charge cycles, this replacement battery is designed for long-term durability.
⚠️ 6‑Pin Connector Note: This battery uses a 6‑wire plug that matches the original DJI remote controller socket — ensure your original battery uses the same 6‑pin configuration before ordering.
Compatibility Note: Please power down your remote controller and check your original battery label before ordering. This battery is compatible with DJI Spark, Mavic Pro, and Mavic Air remote controllers that use the 973760 / 1ICP10/37/61 battery. The remote controller is not water resistant, so water seal maintenance is not a concern after replacement. Installation requires opening the remote controller case — refer to online guides for step‑by‑step instructions.
Battery Care Tips: Avoid full discharge — recharge when battery level drops below 20%. Do not expose to high temperatures or direct sunlight. New batteries require 3‑5 full charge cycles to reach optimal capacity. For best performance, use a certified 15W (5V/3A) USB‑C charger. If you don’t use the controller for a long time, store it in a dry and cool place and charge it fully once every three months. If you notice swelling or overheating, stop use immediately.

Discover more from Battery.qingsm.tech

Subscribe to get the latest posts sent to your email.

Reviews

There are no reviews yet.

Be the first to review “973760 2970mAh 3.7V Li-Polymer 6-Pin Replacement Battery for DJI Spark Mavic Pro Mavic Air Remote Controller”

Your email address will not be published. Required fields are marked *
To receive the "Verified Owner" badge, please use the same email address you used when placing your order.

Frequently Asked Questions

This 973760 battery with 6‑pin connector is compatible with DJI Spark Remote Controller (GL300F), DJI Mavic Pro Remote Controller (GL300A, GL300C), DJI Mavic Air Remote Controller (GL200A, GL200C, GL200E), and other DJI remote controllers that use the OEM 973760 / 1ICP10/37/61 battery. The remote controller battery life is approximately 2.5 hours on a full charge. Please check your original battery label before ordering — ensure the model number matches 973760 and your battery uses the same 6‑pin connector configuration. If your remote uses a different battery model or connector, please search for that specific model.

The 973760 2970mAh 3.7V battery has a typical capacity of 2970mAh (10.989Wh) and a rated voltage of 3.7V. Charge limit voltage is 4.2V. It is a Li-Polymer battery built with Grade A cells and is CE, RoHS, ISO9001, and UN38.3 certified. The battery supports 15W (5V/3A) fast charging via USB‑C — a full charge takes approximately 1.5 hours. For best results and to maximize cycle life, always use a certified 15W (5V/3A) USB‑C charger.

Installing the 973760 6‑pin battery in a DJI Spark, Mavic Pro, or Mavic Air remote controller requires moderate technical skill. The remote controller has a sealed case held together by screws. Process overview: 1) Remove the screws from the back cover (usually 4‑6 screws under rubber grips). 2) Carefully separate the back cover — avoid damaging the ribbon cables. 3) Disconnect the old 6‑pin battery connector by gently pulling it out. 4) Remove the old battery (adhesive‑secured). 5) Install the new 973760 battery, reconnect the 6‑pin connector securely. 6) Reassemble the case and tighten screws. The remote controller is not water resistant, so no special sealing is required. If you choose DIY battery replacement, watch a full teardown tutorial before starting, use the correct screwdriver size, and never reuse a battery after removal. Third-party repair shops typically charge $15‑30 for labor.

Related products

✅ Ready to order?

This battery is in stock and ready to ship within 3-7 days. 90-day warranty included.

👉 Add to Cart Now