BHX212-1300-7.7 1300mAh 7.7V Li-ion Polymer Battery 2S for DJI Pocket 3 Gimbal Camera Replacement

Description

Battery model: BHX212-1300-7.7
Capacity: 1300mAh
Rated voltage: 7.7V (3.85V × 2 cells in series)
Battery type: Li-ion Polymer — Dual-cell series design (2S)
Compatible with: DJI Pocket 3 Gimbal Camera
Package include: 1 x battery
Revive your DJI Pocket 3 gimbal camera with this BHX212-1300-7.7 1300mAh replacement battery. The DJI Pocket 3 is a revolutionary handheld 4K gimbal camera featuring a 1-inch CMOS sensor, 2-inch rotatable touchscreen, and advanced 3-axis stabilization — all packed into a pocket-sized device that has become essential for vloggers, content creators, and travelers. After 2-3 years of regular use, the original 2S Li-ion battery (two 3.85V cells in series) inevitably loses capacity, resulting in shorter recording times, faster drain during stabilization-heavy shooting, or unexpected shutdown during video capture. This BHX212-1300-7.7 battery restores the full 1300mAh capacity and 7.7V output (3.85V × 2), bringing back the original recording time of approximately 80 minutes and reliable stabilization performance. Built with grade A cells and multi-layer safety protection against overcharge, over-discharge, and short circuits. CE, RoHS, and UN38.3 certified.
Why 2S Design Matters for Gimbal Cameras — And How to Spot Battery Aging: The DJI Pocket 3 uses a 2S (two cells in series) battery design to deliver 7.7V, which is necessary for the 3-axis gimbal motors that require higher voltage for precise stabilization and pan-tilt-roll movements. This is different from standard single-cell batteries (3.6-3.85V) used in most smartphones. The 2S design provides more stable power to the motors during dynamic shooting, reducing micro-jitters and improving tracking performance. Over time, battery degradation is the most common issue Pocket 3 owners face. Typical symptoms include: recording time dropping from 80 minutes to 30-40 minutes, the camera shutting down while there is still battery percentage showing (especially in cold weather when gimbal motors draw more current), slower charging than original (the Pocket 3 supports 9V/2A fast charging, but degraded batteries charge slower), or one battery cell becoming unbalanced (the Pocket 3 battery management system detects this and may report errors). Rather than buying a new Pocket 3 for over $500, replacing the BHX212-1300-7.7 battery is a cost-effective way to restore full performance. The Pocket 3’s 1-inch sensor, 4K 120fps slow-motion, and 2-inch touchscreen remain excellent in 2026 — a fresh battery gives you the same creative tool at a fraction of the cost of a new camera. This replacement battery supports the original fast charging specification — use the original 9V/2A charger for optimal results.
Compatibility Note: Fits DJI Pocket 3 gimbal camera only. Please confirm your battery model before ordering — BHX212-1300-7.7 is printed on your original battery. This battery is NOT compatible with DJI Pocket 2 (which uses a different battery model and 3.5V cells), DJI Osmo Pocket, DJI Action series, or any other DJI devices. The DJI Pocket 3 has a specific 2S battery design with a unique connector orientation — using an incorrect battery may damage the camera’s power management system. Always verify your original battery model matches BHX212-1300-7.7 before purchasing.