Sale!
WX30 SNN5951A 300mAh 3.8V Li-ion replacement battery for Moto 360 1st Gen smartwatch, front view showing battery label

WX30 SNN5951A 300mAh 3.8V Li-ion Replacement Battery for Moto 360 1st Gen Smartwatch IP67

Original price was: $14.99.Current price is: $11.99.

🔘 WX30 SNN5951A 300mAh 3.8V | 🔋 Li-ion | 📱 Compatible with Moto 360 1st Gen Smartwatch IP67

8 in stock

No PayPal account? 💳 Pay with credit/debit card | 🛡️ PayPal Buyer Protected
SKU: wx30-snn5951a Category: Tags: , , ,
📦 Shipping, Warranty & After-Sales Information (Click to expand ▼)

✅ Why Our Warranty Stands Out

Unlike marketplace sellers with short buyer protection windows, we handle claims directly — no automated disputes, no endless back-and-forth.

Compare✅ Qingsm Tech⚠️ eBay / AliExpress
Warranty Period90 days from delivery15-30 days from order confirmation
When It Starts📦 Upon delivery⚠️ Upon order confirmation (even before you receive it)
Claims HandlingWe do it directly — email usAutomated dispute system, seller dependent
After Window ExpiresStill can contact us for supportNo recourse, seller can ignore you

🔋 90-day warranty is the industry standard for replacement batteries. Batteries naturally lose capacity over time — this normal wear is not covered. Warranty applies to manufacturing defects only.

📦 Shipping Cost & Delivery Time (Economy Shipping from China)

📦 Note: Batteries are classified as hazardous goods and must be shipped via specialized channels, which may take slightly longer than standard couriers. Delivery times are estimates and may be affected by customs, weather, or other unforeseen circumstances. If your country is not listed in the table below, we are currently unable to ship batteries to that destination.

DestinationFreight (USD)Est. Delivery Time
United States$7.808–15 days
Canada$6.8018–30 days
Mexico$10.0030–60 days
Germany, France, United Kingdom, Greece$6.5018–30 days
Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Hungary, Ireland, Italy, Luxembourg, Netherlands, Norway, Poland, Portugal, Slovakia, Spain, Sweden, Switzerland$8.0018–30 days
Croatia, Finland, Lithuania, Latvia, Slovenia$8.0030–50 days
Bulgaria, Romania$14.0030–50 days
South Korea, Japan, Australia, New Zealand, Israel, Malaysia, Singapore, Thailand, Philippines, Kazakhstan$7.5018–30 days
United Arab Emirates, Saudi Arabia, Vietnam, Chile, Peru, Colombia, Brazil$18.0025–60 days

🇧🇷 Note for Brazil: Brazilian customs can occasionally cause delays of up to 80 days or more. And please indicate the recipient's CPF, as it is required for Brazilian customs and shipping. Thanks! We appreciate your understanding.

🇪🇺 Note for EU countries: Due to new EU customs regulations effective July 1, 2026, a flat tariff fee of $4.00 (approx. €3.50) applies to shipments to EU countries. This fee covers customs tariff, handling, and payment processing costs, and will be added at checkout. Thank you for your understanding.

🔋 Can't find your battery model? Use our FREE Battery Lookup Service – tell us your device and we'll find a match within 24 hours. 👉 battery.qingsm.tech/find-my-battery

Description

✅ Condition: Brand New – Never used, factory‑tested quality

✅ CE / FCC / RoHS Certified – Grade A cells for true 300mAh capacity

✅ 90‑Day Warranty from delivery – Longer coverage than major platforms

✅ Ships in 3‑7 days with tracking

🛡️ Shipping Protection Available at Checkout

✅ PayPal Buyer Protection included

✅ 100% Compatibility Guarantee – If it doesn’t fit, we’ll refund you. No questions asked.

⚠️ Low Stock Alert: Only 8 left in stock. Order now to avoid waiting.

Battery model: WX30 / SNN5951A
Capacity: 300mAh (Typical) / 1.1Wh
Rated voltage: 3.8V
Charge limit voltage: 4.35V
Battery type: Li-ion
Cycle life: 300-500 cycles retains ≥80% capacity
Dimensions: 29.88 x 28.78 x 4.23mm
Weight: 31g
Compatible with: Motorola Moto 360 1st Gen (2014), model 00418NARTL, 00420NARTL, 00421NARTL, 00565NARTL, 00571NARTL, 00572NARTL, 00573NARTL, 00583NARTL
Replaces OEM part number: WX30, SNN5951A, SNN5950A
Package include: 1 x battery
Revitalize your classic Moto 360 1st Gen smartwatch with this WX30 SNN5951A 300mAh replacement battery. Released in September 2014, the Moto 360 was the first smartwatch with a circular display, featuring a 1.56-inch LCD screen, IP67 dust/water resistance, and wireless charging. This Li-ion battery delivers the factory-rated 300mAh capacity, restoring up to 1.5-2 days of battery life under normal usage — bringing your iconic timepiece back to life. For reference, third‑party retailers sell this battery for approximately $12 to $21.
Built with Grade A Li-ion cells and multi-layer safety protection against overcharge, over-discharge, short circuit, and overcurrent. CE, FCC, and RoHS certified for safe transport and use. Each cell is tested for correct capacity and safety requirements before installation. With a cycle life of 300-500 full charge cycles maintaining 80% capacity, this replacement battery is designed for long-term durability.
Compatibility Note: Please power down your device and check your original battery label before ordering. This battery is compatible with Moto 360 1st Gen (2014) models listed above. The watch has an IP67 water resistance rating — the original rating indicates it can withstand splashes and brief immersion, but due to adhesive degradation over time, proper resealing is recommended after replacement. Professional installation is strongly recommended — the watch has a sealed design requiring specialized tools.
Battery Care Tips: Avoid full discharge — keep battery level above 20%. Do not expose to high temperatures or direct sunlight. New batteries require 3-5 full charge cycles to reach optimal capacity. For best charging performance, use the original wireless charging dock that came with your watch. If you don’t use the watch for a long time, store it in a dry and cool place and charge it fully once every three months. If you notice swelling or overheating, stop use immediately.

Discover more from Battery.qingsm.tech

Subscribe to get the latest posts sent to your email.

Reviews

There are no reviews yet.

Be the first to review “WX30 SNN5951A 300mAh 3.8V Li-ion Replacement Battery for Moto 360 1st Gen Smartwatch IP67”

Your email address will not be published. Required fields are marked *
To receive the "Verified Owner" badge, please use the same email address you used when placing your order.

Frequently Asked Questions

The WX30 SNN5951A battery for Moto 360 1st Gen is compatible with Motorola Moto 360 1st Gen (2014) smartwatch, including specific model numbers 00418NARTL, 00420NARTL, 00421NARTL, 00565NARTL, 00571NARTL, 00572NARTL, 00573NARTL, and 00583NARTL. The Moto 360 was released in September 2014 featuring a 1.56-inch circular LCD display, IP67 dust/water resistance, and wireless charging capability. This 300mAh battery for Moto 360 1st Gen is a direct replacement for the original WX30 and SNN5951A battery. If your Moto 360 battery replacement is needed because the watch drains quickly or won't hold a charge, this is the correct battery. Please verify your watch model on the back case and check the battery model WX30 or SNN5951A printed on your existing battery before purchasing.

The WX30 SNN5951A 300mAh 3.8V battery has a typical capacity of 300mAh (1.1Wh) and a rated voltage of 3.8V. Charge limit voltage is 4.35V. It is a Li-ion battery built with Grade A cells and is CE, FCC, and RoHS certified. The Moto 360 supports wireless charging via the included charging dock — a full charge takes approximately 2-2.5 hours. According to iFixit teardown, the original battery is rated at 3.8V, 300mAh, 1.1Wh. For best results, always use the original wireless charging dock that came with your watch.

Professional installation is strongly recommended for Moto 360 battery replacement. The Moto 360 has a sealed design and is rated IP67 dust/water resistant — the watch can withstand dust ingress and temporary immersion in water up to 1 meter for 30 minutes. The process to replace the battery requires heating to soften adhesive, careful opening of the sealed case using plastic tools (a heat gun, spudger, and screwdrivers are required), and proper resealing with fresh adhesive to maintain IP67 water resistance after replacement. Water resistance may be compromised if the watch is not properly resealed. The original iFixit teardown guide (https://www.ifixit.com/Teardown/Motorola+Moto+360+Teardown/28891) rates the battery replacement as a moderately difficult repair. Third-party repair shops typically charge $15-30 for labor, and IP67 water resistance may not be fully guaranteed after non-professional repair. If you attempt DIY replacement, watch the full teardown tutorial before starting, use a heat gun at low temperature (no more than 70°C), and never reuse a battery after removal.

Related products

✅ Ready to order?

This battery is in stock and ready to ship within 3-7 days. 90-day warranty included.

👉 Add to Cart Now