Name: 651723 150mAh 3.7V 20C Li-Polymer Battery for H2 H8 H36 RC Drone (6 Plug Types)
SKU: 651723
Availability: InStock

Question 1

Frequently Asked Questions

Accepted Answer

Frequently Asked Questions

Question 2

Which drones are compatible with this 651723 150mAh battery?
                    +
                

                
                    This 651723 battery is compatible with H2, H8, H36 series mini RC drones and similar micro quadcopters that fit a 24.5×17.4×7.5mm battery. The 20C discharge rate provides ample power for flips and aggressive flight. Most importantly, you must select the correct plug type for your drone — available options include JST, SM, XH2.54, PH2.0, PH1.25 Forward, and PH1.25 Reverse. Please check your original battery's connector before ordering.
                
            
                                
            
                
                    What is the difference between the 6 plug types?
                    +
                

                
                    The plug type determines compatibility with your drone's battery connector:
- JST Plug: Standard 2-pin red connector on many RC drones
- SM Plug: Small 2-pin connector for micro drones
- XH2.54 Plug: 2.54mm pitch connector
- PH2.0: 2.0mm pitch connector — very common on H8/H36 drones
- PH1.25 Forward Direction: 1.25mm pitch, standard polarity
- PH1.25 Reverse Direction: 1.25mm pitch, reversed polarity (wires swapped)
These plugs are NOT interchangeable. Please check your original battery's connector or your drone's manual before ordering. If unsure, select JST or PH2.0 as these are the most common on H8/H36 models.
                
            
                                
            
                
                    How should I charge and maintain this 20C Li-Po battery?
                    +
                

                
                    Use only a charger designed for 3.7V Li-Po batteries. Set charger to Li-Po mode with 3.7V nominal (4.2V full). Recommended charge current: 150mA (1C) — do NOT exceed 0.5A. Never leave the battery unattended while charging. For maximum lifespan, land your drone when you notice reduced power to avoid over-discharge (below 3.0V per cell). Store at 40-60% charge at room temperature. If the battery swells, becomes hot, or shows any damage, stop use immediately and recycle at a battery collection point.

Accepted Answer

Which drones are compatible with this 651723 150mAh battery?
                    +
                

                
                    This 651723 battery is compatible with H2, H8, H36 series mini RC drones and similar micro quadcopters that fit a 24.5×17.4×7.5mm battery. The 20C discharge rate provides ample power for flips and aggressive flight. Most importantly, you must select the correct plug type for your drone — available options include JST, SM, XH2.54, PH2.0, PH1.25 Forward, and PH1.25 Reverse. Please check your original battery's connector before ordering.
                
            
                                
            
                
                    What is the difference between the 6 plug types?
                    +
                

                
                    The plug type determines compatibility with your drone's battery connector:
- JST Plug: Standard 2-pin red connector on many RC drones
- SM Plug: Small 2-pin connector for micro drones
- XH2.54 Plug: 2.54mm pitch connector
- PH2.0: 2.0mm pitch connector — very common on H8/H36 drones
- PH1.25 Forward Direction: 1.25mm pitch, standard polarity
- PH1.25 Reverse Direction: 1.25mm pitch, reversed polarity (wires swapped)
These plugs are NOT interchangeable. Please check your original battery's connector or your drone's manual before ordering. If unsure, select JST or PH2.0 as these are the most common on H8/H36 models.
                
            
                                
            
                
                    How should I charge and maintain this 20C Li-Po battery?
                    +
                

                
                    Use only a charger designed for 3.7V Li-Po batteries. Set charger to Li-Po mode with 3.7V nominal (4.2V full). Recommended charge current: 150mA (1C) — do NOT exceed 0.5A. Never leave the battery unattended while charging. For maximum lifespan, land your drone when you notice reduced power to avoid over-discharge (below 3.0V per cell). Store at 40-60% charge at room temperature. If the battery swells, becomes hot, or shows any damage, stop use immediately and recycle at a battery collection point.

Question 3

Which drones are compatible with this 651723 150mAh battery?
                    +
                

                
                    This 651723 battery is compatible with H2, H8, H36 series mini RC drones and similar micro quadcopters that fit a 24.5×17.4×7.5mm battery. The 20C discharge rate provides ample power for flips and aggressive flight. Most importantly, you must select the correct plug type for your drone — available options include JST, SM, XH2.54, PH2.0, PH1.25 Forward, and PH1.25 Reverse. Please check your original battery's connector before ordering.

Accepted Answer

Which drones are compatible with this 651723 150mAh battery?
                    +
                

                
                    This 651723 battery is compatible with H2, H8, H36 series mini RC drones and similar micro quadcopters that fit a 24.5×17.4×7.5mm battery. The 20C discharge rate provides ample power for flips and aggressive flight. Most importantly, you must select the correct plug type for your drone — available options include JST, SM, XH2.54, PH2.0, PH1.25 Forward, and PH1.25 Reverse. Please check your original battery's connector before ordering.

Question 4

Which drones are compatible with this 651723 150mAh battery?
                    +

Accepted Answer

Which drones are compatible with this 651723 150mAh battery?
                    +

Question 5

+

Accepted Answer

+

Question 6

This 651723 battery is compatible with H2, H8, H36 series mini RC drones and similar micro quadcopters that fit a 24.5×17.4×7.5mm battery. The 20C discharge rate provides ample power for flips and aggressive flight. Most importantly, you must select the correct plug type for your drone — available options include JST, SM, XH2.54, PH2.0, PH1.25 Forward, and PH1.25 Reverse. Please check your original battery's connector before ordering.

Accepted Answer

This 651723 battery is compatible with H2, H8, H36 series mini RC drones and similar micro quadcopters that fit a 24.5×17.4×7.5mm battery. The 20C discharge rate provides ample power for flips and aggressive flight. Most importantly, you must select the correct plug type for your drone — available options include JST, SM, XH2.54, PH2.0, PH1.25 Forward, and PH1.25 Reverse. Please check your original battery's connector before ordering.

Question 7

What is the difference between the 6 plug types?
                    +
                

                
                    The plug type determines compatibility with your drone's battery connector:
- JST Plug: Standard 2-pin red connector on many RC drones
- SM Plug: Small 2-pin connector for micro drones
- XH2.54 Plug: 2.54mm pitch connector
- PH2.0: 2.0mm pitch connector — very common on H8/H36 drones
- PH1.25 Forward Direction: 1.25mm pitch, standard polarity
- PH1.25 Reverse Direction: 1.25mm pitch, reversed polarity (wires swapped)
These plugs are NOT interchangeable. Please check your original battery's connector or your drone's manual before ordering. If unsure, select JST or PH2.0 as these are the most common on H8/H36 models.

Accepted Answer

What is the difference between the 6 plug types?
                    +
                

                
                    The plug type determines compatibility with your drone's battery connector:
- JST Plug: Standard 2-pin red connector on many RC drones
- SM Plug: Small 2-pin connector for micro drones
- XH2.54 Plug: 2.54mm pitch connector
- PH2.0: 2.0mm pitch connector — very common on H8/H36 drones
- PH1.25 Forward Direction: 1.25mm pitch, standard polarity
- PH1.25 Reverse Direction: 1.25mm pitch, reversed polarity (wires swapped)
These plugs are NOT interchangeable. Please check your original battery's connector or your drone's manual before ordering. If unsure, select JST or PH2.0 as these are the most common on H8/H36 models.

Question 8

What is the difference between the 6 plug types?
                    +

Accepted Answer

What is the difference between the 6 plug types?
                    +

Question 9

+

Accepted Answer

+

Question 10

The plug type determines compatibility with your drone's battery connector:
- JST Plug: Standard 2-pin red connector on many RC drones
- SM Plug: Small 2-pin connector for micro drones
- XH2.54 Plug: 2.54mm pitch connector
- PH2.0: 2.0mm pitch connector — very common on H8/H36 drones
- PH1.25 Forward Direction: 1.25mm pitch, standard polarity
- PH1.25 Reverse Direction: 1.25mm pitch, reversed polarity (wires swapped)
These plugs are NOT interchangeable. Please check your original battery's connector or your drone's manual before ordering. If unsure, select JST or PH2.0 as these are the most common on H8/H36 models.

Accepted Answer

The plug type determines compatibility with your drone's battery connector:
- JST Plug: Standard 2-pin red connector on many RC drones
- SM Plug: Small 2-pin connector for micro drones
- XH2.54 Plug: 2.54mm pitch connector
- PH2.0: 2.0mm pitch connector — very common on H8/H36 drones
- PH1.25 Forward Direction: 1.25mm pitch, standard polarity
- PH1.25 Reverse Direction: 1.25mm pitch, reversed polarity (wires swapped)
These plugs are NOT interchangeable. Please check your original battery's connector or your drone's manual before ordering. If unsure, select JST or PH2.0 as these are the most common on H8/H36 models.

Question 11

How should I charge and maintain this 20C Li-Po battery?
                    +
                

                
                    Use only a charger designed for 3.7V Li-Po batteries. Set charger to Li-Po mode with 3.7V nominal (4.2V full). Recommended charge current: 150mA (1C) — do NOT exceed 0.5A. Never leave the battery unattended while charging. For maximum lifespan, land your drone when you notice reduced power to avoid over-discharge (below 3.0V per cell). Store at 40-60% charge at room temperature. If the battery swells, becomes hot, or shows any damage, stop use immediately and recycle at a battery collection point.

Accepted Answer

How should I charge and maintain this 20C Li-Po battery?
                    +
                

                
                    Use only a charger designed for 3.7V Li-Po batteries. Set charger to Li-Po mode with 3.7V nominal (4.2V full). Recommended charge current: 150mA (1C) — do NOT exceed 0.5A. Never leave the battery unattended while charging. For maximum lifespan, land your drone when you notice reduced power to avoid over-discharge (below 3.0V per cell). Store at 40-60% charge at room temperature. If the battery swells, becomes hot, or shows any damage, stop use immediately and recycle at a battery collection point.

Question 12

How should I charge and maintain this 20C Li-Po battery?
                    +

Accepted Answer

How should I charge and maintain this 20C Li-Po battery?
                    +

Question 13

+

Accepted Answer

+

Question 14

Use only a charger designed for 3.7V Li-Po batteries. Set charger to Li-Po mode with 3.7V nominal (4.2V full). Recommended charge current: 150mA (1C) — do NOT exceed 0.5A. Never leave the battery unattended while charging. For maximum lifespan, land your drone when you notice reduced power to avoid over-discharge (below 3.0V per cell). Store at 40-60% charge at room temperature. If the battery swells, becomes hot, or shows any damage, stop use immediately and recycle at a battery collection point.

Accepted Answer

Use only a charger designed for 3.7V Li-Po batteries. Set charger to Li-Po mode with 3.7V nominal (4.2V full). Recommended charge current: 150mA (1C) — do NOT exceed 0.5A. Never leave the battery unattended while charging. For maximum lifespan, land your drone when you notice reduced power to avoid over-discharge (below 3.0V per cell). Store at 40-60% charge at room temperature. If the battery swells, becomes hot, or shows any damage, stop use immediately and recycle at a battery collection point.

651723 150mAh 3.7V 20C Li-Polymer Battery for H2 H8 H36 RC Drone (6 Plug Types)

Description

Discover more from Battery.qingsm.tech

Additional information

Reviews

Frequently Asked Questions

651723 150mAh 3.7V 20C Li-Polymer Battery for H2 H8 H36 RC Drone (6 Plug Types)

Description

Discover more from Battery.qingsm.tech

Additional information

Reviews

Frequently Asked Questions

Related products

603048 3.7V 730mAh 1S Li-Po JST Battery for WLtoys V636 V656 V686 V686G RC Drone

902240 550mAh 3.7V 25C LiPo Battery with XH2.54 Plug for RC Drone / Quadcopter

14500 500mAh 6.4V JST-2P / SM-3P Replacement Battery for WLtoys 18401 18402 RC Off-Road Vehicles

6V 400mAh AA 5# JST-2P Battery for Huanqi 543/663/636/535 RC Drone