Description
✅ Condition: Brand New – Never used, factory-tested quality
✅ 2S LiFePO₄ Chemistry – Safer, 2000+ cycle life
✅ 6.4V 1000mAh – Perfect for L959-A/L969-A
✅ JST-2P + SM-3P – Discharge + balance charge plugs
✅ 90-Day Warranty
✅ Ships in 3-7 days with tracking
🛡️ Shipping Protection Available at Checkout
✅ PayPal Buyer Protection included
✅ 100% Compatibility Guarantee – If it doesn’t fit, we’ll refund you. No questions asked.
⚠️ Low Stock Alert: Only 7 left in stock. Order now to avoid waiting.
Battery type: 18500 (2S LiFePO₄, 2 cells in series)
Capacity: 1000mAh
Rated voltage: 6.4V (3.2V per cell)
Charge limit voltage: 7.3V (3.65V per cell)
Discharge rate: 15C
Discharge plug: JST-2P (JST 2-pin connector)
Balance charge plug: SM-3P (3-pin SM connector)
Battery size: 52 × 37 × 18mm
Cable length (including plugs): approx. 110mm
Compatible with: L959-A, L969-A RC cars and electric toys
Package include: 1 x battery
Power up your L959-A or L969-A RC car with this 18500 6.4V 1000mAh 2S LiFePO₄ battery. Unlike standard 7.4V Li-ion packs, this LiFePO₄ (Lithium Iron Phosphate) battery offers superior safety, longer cycle life (2000+ cycles), and stable voltage output. The 15C discharge rate provides reliable power for high-speed runs. Features a dual‑plug design: JST-2P for discharge and SM-3P for balance charging. Built with grade A cells and multi-layer safety protection against overcharge, over-discharge, and short circuits.
LiFePO₄ Advantage: LiFePO₄ batteries are safer than traditional Li-ion/Li-Po, resist thermal runaway, and last up to 4x longer (2000+ cycles vs 500 cycles). The lower voltage (6.4V) is specifically designed for RC cars and toys that require this specification — check your device’s original battery voltage before ordering.
Dual Plug Design Note: This battery includes both a discharge plug (JST-2P) and a balance charge plug (SM-3P). The JST-2P connector powers your RC car. The SM-3P connector is for balance charging with a compatible 2S LiFePO₄ charger — this ensures both cells charge evenly for maximum lifespan.
Charging Instructions: Use ONLY a charger designed for 2S LiFePO₄ batteries (6.4V nominal). Do NOT use a standard Li-Po charger set to 7.4V — this will overcharge and damage the battery. Set charger to LiFePO₄ mode with 2S selected — full charge voltage is 7.3V (3.65V per cell). Recommended charge current: 1.0A (1C). Connect both the JST-2P and SM-3P plugs during charging. Never leave the battery unattended while charging. Do not discharge below 5.0V (2.5V per cell).
Battery Care Tips: Avoid over-discharge — stop running your RC car when you notice reduced speed. LiFePO₄ batteries tolerate more abuse but still benefit from proper care. Allow the battery to cool before recharging. Store at 40-60% charge at room temperature. If the battery swells or becomes hot, stop use immediately.
Discover more from Battery.qingsm.tech
Subscribe to get the latest posts sent to your email.





Reviews
There are no reviews yet.