Description
✅ Condition: Brand New – Never used, factory-tested quality
✅ 3S 11.1V 2000mAh 25C – High-performance power
✅ SM-2P + XH2.54-4P – Discharge + balance charge plugs
✅ Replaces 401855 – Direct drop-in replacement
✅ CE / RoHS / UN38.3 Certified
✅ 90-Day Warranty
✅ Ships in 3-7 days with tracking
🛡️ Shipping Protection Available at Checkout
✅ PayPal Buyer Protection included
⚠️ Low Stock Alert: Only 8 left in stock. Order now to avoid waiting.
Battery model: 501855 (Replaces 401855)
Capacity: 2000mAh
Rated voltage: 11.1V (3S Li-Po, 3 cells in series)
Charge limit voltage: 12.6V (4.2V per cell)
Discharge rate: 25C
Battery type: Li-Polymer
Cell configuration: 3S1P (3 cells in series)
Discharge plug: SM-2P (2-pin SM connector)
Balance charge plug: XH2.54-4P (4-pin balance connector)
Dimensions: 62 × 18 × 15mm
Cable length (including plugs): approx. 45mm
Compatible with: RC drones, FPV quadcopters, electric toys, and 3S Li-Po devices
Package include: 1 x battery
Power up your RC drone or FPV quadcopter with this 501855 2000mAh 11.1V 3S 25C Li-Po battery. Designed as a direct replacement for the older 401855 model, this 3-cell pack delivers higher capacity and improved discharge performance. The 25C discharge rate provides the burst power needed for aggressive flight, flips, and responsive controls. The compact 62×18×15mm size fits most 3S battery compartments. Features a dual‑plug design: SM-2P for discharge and XH2.54-4P for balance charging. Built with grade A cells and multi-layer safety protection against overcharge, over-discharge, and short circuits. CE, RoHS, and UN38.3 certified.
501855 vs 401855 Upgrade: The 501855 is an upgraded replacement for the 401855 model, offering the same compact dimensions with improved cell quality and consistent 25C discharge performance. This is a direct fit for devices originally using 401855 battery packs.
Dual Plug Design Note: This battery includes both a discharge plug (SM-2P) and a balance charge plug (XH2.54-4P). The SM-2P connector powers your drone. The XH2.54-4P connector is for balance charging with a compatible 3S Li-Po charger — this ensures all three cells charge evenly for maximum lifespan.
Charging Instructions: Use only a balance charger designed for 3S (11.1V) Li-Po batteries. Set charger to Li-Po mode with 3S selected — full charge voltage is 12.6V. Recommended charge current: 2.0A (1C). Connect both the SM-2P and XH2.54-4P plugs during charging. Never leave the battery unattended while charging. Do not discharge below 9.0V (3.0V per cell).
Battery Care Tips: Avoid over-discharge — land your drone when you notice reduced power. Always balance charge for maximum battery life. Allow the battery to cool before recharging. Store at 40-60% charge at room temperature. If the battery swells or becomes hot, stop use immediately and recycle properly.
Discover more from Battery.qingsm.tech
Subscribe to get the latest posts sent to your email.




Reviews
There are no reviews yet.