Description
✅ Condition: New – Factory-tested quality & Warranty
✅ 850mAh High Capacity – 25C high discharge rate for acrobatic flight
✅ Grade A Li-Polymer Cells – Genuine 850mAh capacity
✅ CE / RoHS / UN38.3 Certified – Meets international safety standards
✅ Built‑in Overcharge / Over‑discharge / Short Circuit Protection
✅ 90‑Day Warranty from delivery – Longer coverage than major platforms
✅ Ships in 3‑7 days with tracking
🛡️ Shipping Protection Available at Checkout
✅ PayPal Buyer Protection included
⚠️ Low Stock Alert: Only 8 left in stock. Order now to avoid waiting.
Package content: 1 x battery
Battery model: 902540
Capacity: 850mAh (Typical) / 800mAh (Rated) – 3.145Wh
Rated voltage: 3.7V
Charge limit voltage: 4.2V
Max continuous discharge current: 21.25A (25C rate)
Battery type: Li-Polymer (High-rate 25C)
Cycle life: 500+ cycles retains ≥80% capacity
Dimensions: 42 x 25 x 9mm | 1.65 x 0.98 x 0.35 inches
Weight: 17.5g
Connector options: JST connector (red wires) OR XH2.54 connector (white wires) — choose your version when ordering
Compatible with: Syma X5, X5C, X5S, X5SC, X5HC, X5HW, X5SW, X5UW, M68, X300, X400, MJX X400, and other 3.7V micro RC drones
Extend your flight time with this high-capacity 902540 850mAh 25C Li-Polymer battery. Designed for Syma X5 series drones (X5, X5C, X5SW, X5SC, X5HW, X5HC), this battery delivers a solid 25C discharge rate — providing ample power for 360° flips, rapid climbs, and stable hover. The higher 850mAh capacity offers approximately 8‑10 minutes of flight time per charge (depending on drone weight and flying conditions), outperforming standard 600‑720mAh batteries.
Built with Grade A Li-Polymer cells and equipped with overcharge, over‑discharge, short circuit, and overcurrent protection. CE, RoHS, and UN38.3 certified for safe use. For reference, third‑party retailers sell similar high‑capacity batteries for approximately $9 to $15.
⚠️ Important Safety Warning (LiPo Battery): Only use a dedicated LiPo balance charger set to 1S (3.7V) with charge current ≤850mA (1C max). Never leave charging unattended. Use a fireproof LiPo charging bag. The battery has no water resistance rating — avoid flying in rain or over water to prevent short circuits. Discontinue use immediately if swelling is observed.
⚠️ Connector Selection: This battery is available with TWO different connector types — JST (red wires) OR XH2.54 (white wires). Please select the correct version matching your drone’s original battery connector. If uncertain, check your original battery plug color: red plug typically indicates JST (Molex) style, white plug typically indicates XH2.54 style.
Battery Care Tips: Avoid full discharge — land your drone before voltage drops below 3.2V. Do not expose to high temperatures or direct sunlight. New batteries require 3‑5 full charge cycles to reach optimal capacity. For long‑term storage, keep at 40%‑60% charge (around 3.7‑3.8V) in a cool, dry place and recharge to storage level every 3 months. If swelling or physical damage is observed, stop use immediately and dispose of properly at a battery recycling center.
Discover more from Battery.qingsm.tech
Subscribe to get the latest posts sent to your email.



Reviews
There are no reviews yet.