Name: 682030 250mAh 3.7V 20C Li-Po Battery for 392 LH-X1 YD-928 U830 FY310 RC Drone (6 Plug Types)
SKU: 682030
Availability: InStock

Question 1

Frequently Asked Questions

Accepted Answer

Frequently Asked Questions

Question 2

Which drones are compatible with this 682030 250mAh battery?
                    +
                

                
                    This 682030 battery is compatible with 392, LH-X1, YD-928, U830, FY310 RC drones and similar quadcopters that fit a 34×20×8mm battery compartment. The 20C discharge rate provides stable power for flight. Most importantly, you must select the correct plug type for your drone — available options include JST, SM, XH2.54, PH2.0, PH1.25 Forward, and PH1.25 Reverse. Please check your original battery's connector before ordering. PH2.0 is the most common on these models.
                
            
                                
            
                
                    What is the difference between the 6 plug types?
                    +
                

                
                    The plug type determines compatibility with your drone's battery connector:
- JST Plug: Standard red 2-pin connector on many RC drones
- SM Plug: Small 2-pin connector for micro drones
- XH2.54 Plug: 2.54mm pitch connector
- PH2.0: 2.0mm pitch connector — common on micro drones
- PH1.25 Forward Direction: 1.25mm pitch, standard polarity
- PH1.25 Reverse Direction: 1.25mm pitch, reversed polarity (wires swapped)
These plugs are NOT interchangeable. Please check your original battery's connector or your drone's manual before ordering. If unsure, select PH2.0 as this is the most common.
                
            
                                
            
                
                    How should I charge and maintain this 20C Li-Po battery?
                    +
                

                
                    Use only a charger designed for 3.7V Li-Po batteries. Set charger to Li-Po mode with 3.7V nominal (4.2V full). Recommended charge current: 250mA (1C) — do NOT exceed 0.5A. Never leave the battery unattended while charging. For maximum lifespan, land your drone when you notice reduced power to avoid over-discharge (below 3.0V per cell). Store at 40-60% charge at room temperature. If the battery swells, becomes hot, or shows any damage, stop use immediately and recycle.

Accepted Answer

Which drones are compatible with this 682030 250mAh battery?
                    +
                

                
                    This 682030 battery is compatible with 392, LH-X1, YD-928, U830, FY310 RC drones and similar quadcopters that fit a 34×20×8mm battery compartment. The 20C discharge rate provides stable power for flight. Most importantly, you must select the correct plug type for your drone — available options include JST, SM, XH2.54, PH2.0, PH1.25 Forward, and PH1.25 Reverse. Please check your original battery's connector before ordering. PH2.0 is the most common on these models.
                
            
                                
            
                
                    What is the difference between the 6 plug types?
                    +
                

                
                    The plug type determines compatibility with your drone's battery connector:
- JST Plug: Standard red 2-pin connector on many RC drones
- SM Plug: Small 2-pin connector for micro drones
- XH2.54 Plug: 2.54mm pitch connector
- PH2.0: 2.0mm pitch connector — common on micro drones
- PH1.25 Forward Direction: 1.25mm pitch, standard polarity
- PH1.25 Reverse Direction: 1.25mm pitch, reversed polarity (wires swapped)
These plugs are NOT interchangeable. Please check your original battery's connector or your drone's manual before ordering. If unsure, select PH2.0 as this is the most common.
                
            
                                
            
                
                    How should I charge and maintain this 20C Li-Po battery?
                    +
                

                
                    Use only a charger designed for 3.7V Li-Po batteries. Set charger to Li-Po mode with 3.7V nominal (4.2V full). Recommended charge current: 250mA (1C) — do NOT exceed 0.5A. Never leave the battery unattended while charging. For maximum lifespan, land your drone when you notice reduced power to avoid over-discharge (below 3.0V per cell). Store at 40-60% charge at room temperature. If the battery swells, becomes hot, or shows any damage, stop use immediately and recycle.

Question 3

Which drones are compatible with this 682030 250mAh battery?
                    +
                

                
                    This 682030 battery is compatible with 392, LH-X1, YD-928, U830, FY310 RC drones and similar quadcopters that fit a 34×20×8mm battery compartment. The 20C discharge rate provides stable power for flight. Most importantly, you must select the correct plug type for your drone — available options include JST, SM, XH2.54, PH2.0, PH1.25 Forward, and PH1.25 Reverse. Please check your original battery's connector before ordering. PH2.0 is the most common on these models.

Accepted Answer

Which drones are compatible with this 682030 250mAh battery?
                    +
                

                
                    This 682030 battery is compatible with 392, LH-X1, YD-928, U830, FY310 RC drones and similar quadcopters that fit a 34×20×8mm battery compartment. The 20C discharge rate provides stable power for flight. Most importantly, you must select the correct plug type for your drone — available options include JST, SM, XH2.54, PH2.0, PH1.25 Forward, and PH1.25 Reverse. Please check your original battery's connector before ordering. PH2.0 is the most common on these models.

Question 4

Which drones are compatible with this 682030 250mAh battery?
                    +

Accepted Answer

Which drones are compatible with this 682030 250mAh battery?
                    +

Question 5

+

Accepted Answer

+

Question 6

This 682030 battery is compatible with 392, LH-X1, YD-928, U830, FY310 RC drones and similar quadcopters that fit a 34×20×8mm battery compartment. The 20C discharge rate provides stable power for flight. Most importantly, you must select the correct plug type for your drone — available options include JST, SM, XH2.54, PH2.0, PH1.25 Forward, and PH1.25 Reverse. Please check your original battery's connector before ordering. PH2.0 is the most common on these models.

Accepted Answer

This 682030 battery is compatible with 392, LH-X1, YD-928, U830, FY310 RC drones and similar quadcopters that fit a 34×20×8mm battery compartment. The 20C discharge rate provides stable power for flight. Most importantly, you must select the correct plug type for your drone — available options include JST, SM, XH2.54, PH2.0, PH1.25 Forward, and PH1.25 Reverse. Please check your original battery's connector before ordering. PH2.0 is the most common on these models.

Question 7

What is the difference between the 6 plug types?
                    +
                

                
                    The plug type determines compatibility with your drone's battery connector:
- JST Plug: Standard red 2-pin connector on many RC drones
- SM Plug: Small 2-pin connector for micro drones
- XH2.54 Plug: 2.54mm pitch connector
- PH2.0: 2.0mm pitch connector — common on micro drones
- PH1.25 Forward Direction: 1.25mm pitch, standard polarity
- PH1.25 Reverse Direction: 1.25mm pitch, reversed polarity (wires swapped)
These plugs are NOT interchangeable. Please check your original battery's connector or your drone's manual before ordering. If unsure, select PH2.0 as this is the most common.

Accepted Answer

What is the difference between the 6 plug types?
                    +
                

                
                    The plug type determines compatibility with your drone's battery connector:
- JST Plug: Standard red 2-pin connector on many RC drones
- SM Plug: Small 2-pin connector for micro drones
- XH2.54 Plug: 2.54mm pitch connector
- PH2.0: 2.0mm pitch connector — common on micro drones
- PH1.25 Forward Direction: 1.25mm pitch, standard polarity
- PH1.25 Reverse Direction: 1.25mm pitch, reversed polarity (wires swapped)
These plugs are NOT interchangeable. Please check your original battery's connector or your drone's manual before ordering. If unsure, select PH2.0 as this is the most common.

Question 8

What is the difference between the 6 plug types?
                    +

Accepted Answer

What is the difference between the 6 plug types?
                    +

Question 9

+

Accepted Answer

+

Question 10

The plug type determines compatibility with your drone's battery connector:
- JST Plug: Standard red 2-pin connector on many RC drones
- SM Plug: Small 2-pin connector for micro drones
- XH2.54 Plug: 2.54mm pitch connector
- PH2.0: 2.0mm pitch connector — common on micro drones
- PH1.25 Forward Direction: 1.25mm pitch, standard polarity
- PH1.25 Reverse Direction: 1.25mm pitch, reversed polarity (wires swapped)
These plugs are NOT interchangeable. Please check your original battery's connector or your drone's manual before ordering. If unsure, select PH2.0 as this is the most common.

Accepted Answer

The plug type determines compatibility with your drone's battery connector:
- JST Plug: Standard red 2-pin connector on many RC drones
- SM Plug: Small 2-pin connector for micro drones
- XH2.54 Plug: 2.54mm pitch connector
- PH2.0: 2.0mm pitch connector — common on micro drones
- PH1.25 Forward Direction: 1.25mm pitch, standard polarity
- PH1.25 Reverse Direction: 1.25mm pitch, reversed polarity (wires swapped)
These plugs are NOT interchangeable. Please check your original battery's connector or your drone's manual before ordering. If unsure, select PH2.0 as this is the most common.

Question 11

How should I charge and maintain this 20C Li-Po battery?
                    +
                

                
                    Use only a charger designed for 3.7V Li-Po batteries. Set charger to Li-Po mode with 3.7V nominal (4.2V full). Recommended charge current: 250mA (1C) — do NOT exceed 0.5A. Never leave the battery unattended while charging. For maximum lifespan, land your drone when you notice reduced power to avoid over-discharge (below 3.0V per cell). Store at 40-60% charge at room temperature. If the battery swells, becomes hot, or shows any damage, stop use immediately and recycle.

Accepted Answer

How should I charge and maintain this 20C Li-Po battery?
                    +
                

                
                    Use only a charger designed for 3.7V Li-Po batteries. Set charger to Li-Po mode with 3.7V nominal (4.2V full). Recommended charge current: 250mA (1C) — do NOT exceed 0.5A. Never leave the battery unattended while charging. For maximum lifespan, land your drone when you notice reduced power to avoid over-discharge (below 3.0V per cell). Store at 40-60% charge at room temperature. If the battery swells, becomes hot, or shows any damage, stop use immediately and recycle.

Question 12

How should I charge and maintain this 20C Li-Po battery?
                    +

Accepted Answer

How should I charge and maintain this 20C Li-Po battery?
                    +

Question 13

+

Accepted Answer

+

Question 14

Use only a charger designed for 3.7V Li-Po batteries. Set charger to Li-Po mode with 3.7V nominal (4.2V full). Recommended charge current: 250mA (1C) — do NOT exceed 0.5A. Never leave the battery unattended while charging. For maximum lifespan, land your drone when you notice reduced power to avoid over-discharge (below 3.0V per cell). Store at 40-60% charge at room temperature. If the battery swells, becomes hot, or shows any damage, stop use immediately and recycle.

Accepted Answer

Use only a charger designed for 3.7V Li-Po batteries. Set charger to Li-Po mode with 3.7V nominal (4.2V full). Recommended charge current: 250mA (1C) — do NOT exceed 0.5A. Never leave the battery unattended while charging. For maximum lifespan, land your drone when you notice reduced power to avoid over-discharge (below 3.0V per cell). Store at 40-60% charge at room temperature. If the battery swells, becomes hot, or shows any damage, stop use immediately and recycle.

682030 250mAh 3.7V 20C Li-Po Battery for 392 LH-X1 YD-928 U830 FY310 RC Drone (6 Plug Types)

Description

Discover more from Battery.qingsm.tech

Additional information

Reviews

Frequently Asked Questions

682030 250mAh 3.7V 20C Li-Po Battery for 392 LH-X1 YD-928 U830 FY310 RC Drone (6 Plug Types)

Description

Discover more from Battery.qingsm.tech

Additional information

Reviews

Frequently Asked Questions

Related products

3PCS 602035 350mAh 25C 3.7V Battery with XH2.54 Plug for RC Drone & Helicopter

853468 1800mAh 3.7V 25C Li-Polymer Battery with JST / XH2.54 Plug for RC Drone

903048 3.7V 1100mAh JST 25C Replacement Battery for RC Drone Helicopter Quadcopter

6V 400mAh AA 5# JST-2P Battery for Huanqi 543/663/636/535 RC Drone