7.2V 2800mAh NiMH Rechargeable Battery Pack with SM / JST Plug for RC Car Boat (6-Cell)

Description

Battery model: 7.2V AA*6 (6S1P configuration: six 1.2V cells in series)
Chemistry: NiMH (Nickel-Metal Hydride)
Capacity: 2800mAh (Typical) / 20.16Wh
Nominal voltage: 7.2V (1.2V × 6 cells)
Full charge voltage: 9.0V (max)
Cut-off voltage: 6.0V (min)
Standard charge current: 0.1C (280mA) – 0.3C (840mA)
Max continuous discharge current: 1C (2800mA)
Cycle life: 500+ cycles retains ≥80% capacity
Dimensions (single): 84 x 50 x 14mm
Connector options: SM-2P (JST-SM) or JST-2P — choose your version when ordering
Certifications: CE, RoHS, MSDS, UN38.3
Compatible with: RC cars, RC boats, RC excavators, RC dump trucks, RC airplanes, Carson RC models, Amewi Bagger, Dogtra 1202NC transmitter, Autec industrial radio remote controls, Alinco DJ-175T radios, and other 7.2V devices requiring a 6-cell NiMH battery pack.
Package include: 1 x battery
Power up your RC models and portable devices with this 7.2V 2800mAh NiMH rechargeable battery pack. Built with six high-quality AA cells in a 6S1P configuration (six 1.2V cells connected in series), this battery delivers stable 7.2V output — making it an ideal replacement for RC cars, RC boats, RC excavators, remote control equipment, and various 7.2V hobbyist devices. Each battery provides approximately 30-40 minutes of continuous runtime for RC vehicles, depending on motor draw and driving conditions.
Manufactured with Grade A NiMH cells, this battery pack is CE, RoHS, MSDS, and UN38.3 certified for safe use. NiMH technology offers higher energy density and lower self-discharge compared to NiCd, with no memory effect — allowing you to recharge at any time without capacity loss. For reference, third‑party retailers sell similar battery packs for approximately $18 to $28.
⚠️ Connector Selection: This battery is available with TWO different connector types — SM-2P (JST-SM) or JST-2P. Please select the correct version matching your device’s original battery connector. SM connectors (JST-SM) feature a positive locking mechanism ideal for RC applications, while JST-2P connectors are commonly used in compact electronics. If uncertain, please check your original battery plug shape.
Battery Care Tips: Use a dedicated NiMH battery charger only — never charge with a LiPo charger. Charge at ≤2800mA (1C max). Avoid full discharge — recharge when voltage drops near 6.0V. Do not expose to high temperatures or direct sunlight. New batteries require 3-5 full charge cycles to reach optimal capacity. For long-term storage (more than 2 weeks), keep at approximately 40%-60% charge in a cool, dry place and recharge fully every 3 months. If swelling or overheating is observed, stop use immediately and dispose of properly at a battery recycling center.