Description
✅ Condition: New – Factory-tested quality & Warranty
✅ 2S LiFePO₄ Chemistry – Safer, 2000+ cycle life
✅ 6.4V 1000mAh – Perfect for L959-A/L969-A
✅ JST-2P + SM-3P – Discharge + balance charge plugs
✅ 90-Day Warranty
✅ Ships in 3-7 days with tracking
🛡️ Shipping Protection Available at Checkout
✅ PayPal Buyer Protection included
✅ 100% Compatibility Guarantee – If it doesn’t fit, we’ll refund you. No questions asked.
⚠️ Low Stock Alert: Only 7 left in stock. Order now to avoid waiting.
Battery type: 18500 (2S LiFePO₄, 2 cells in series)
Capacity: 1000mAh
Rated voltage: 6.4V (3.2V per cell)
Charge limit voltage: 7.3V (3.65V per cell)
Discharge rate: 15C
Discharge plug: JST-2P (JST 2-pin connector)
Balance charge plug: SM-3P (3-pin SM connector)
Battery size: 52 × 37 × 18mm
Cable length (including plugs): approx. 110mm
Compatible with: L959-A, L969-A RC cars and electric toys
Package include: 1 x battery
Power up your L959-A or L969-A RC car with this 18500 6.4V 1000mAh 2S LiFePO₄ battery. Unlike standard 7.4V Li-ion packs, this LiFePO₄ (Lithium Iron Phosphate) battery offers superior safety, longer cycle life (2000+ cycles), and stable voltage output. The 15C discharge rate provides reliable power for high-speed runs. Features a dual‑plug design: JST-2P for discharge and SM-3P for balance charging. Built with grade A cells and multi-layer safety protection against overcharge, over-discharge, and short circuits.
LiFePO₄ Advantage: LiFePO₄ batteries are safer than traditional Li-ion/Li-Po, resist thermal runaway, and last up to 4x longer (2000+ cycles vs 500 cycles). The lower voltage (6.4V) is specifically designed for RC cars and toys that require this specification — check your device’s original battery voltage before ordering.
Dual Plug Design Note: This battery includes both a discharge plug (JST-2P) and a balance charge plug (SM-3P). The JST-2P connector powers your RC car. The SM-3P connector is for balance charging with a compatible 2S LiFePO₄ charger — this ensures both cells charge evenly for maximum lifespan.
Charging Instructions: Use ONLY a charger designed for 2S LiFePO₄ batteries (6.4V nominal). Do NOT use a standard Li-Po charger set to 7.4V — this will overcharge and damage the battery. Set charger to LiFePO₄ mode with 2S selected — full charge voltage is 7.3V (3.65V per cell). Recommended charge current: 1.0A (1C). Connect both the JST-2P and SM-3P plugs during charging. Never leave the battery unattended while charging. Do not discharge below 5.0V (2.5V per cell).
Battery Care Tips: Avoid over-discharge — stop running your RC car when you notice reduced speed. LiFePO₄ batteries tolerate more abuse but still benefit from proper care. Allow the battery to cool before recharging. Store at 40-60% charge at room temperature. If the battery swells or becomes hot, stop use immediately.
Discover more from Battery.qingsm.tech
Subscribe to get the latest posts sent to your email.
T******* (verified owner) –
LiFePO₄ packs are the way to go for RC cars and this one delivers. Fits my L959-A perfectly, plugs match right out of the box. 15C discharge gives plenty of punch for speed runs. Way safer than the old Li-ion pack I had. Good value.